Calgary Lawn Mowing services

How Often Should I Fertilize My Grass


The standard interval for Calgary Lawn Mowing services is stated to be six weeks. However, the frequency depends on the existing soil conditions, the volume of nutrients, climatic conditions, landscape, and the type of plants you grow in the garden. You may have to do a soil test before making a decision. I will tell you why these steps are required.

Soil Types Analysis – Most Important Factor


The first step you will want to do is to test the soil type in your garden. It could be sandy, clay, loamy, chalky, silt, or peaty. You should also test the percentage of organic materials that are present in the soil because they contribute to its fertility.

Fens, peats, and bogs are the typical soils that are rich in minerals, proteins, and other nutrients. They are the best types for decomposing the leaves, grass, and other organic manure you may want to feed to the grass. They can also hold fertility for a longer time.

Water retention capacity of the soil is the next critical factor which will tell you about the frequency of fertilizing. For example, clay can hold water for a relatively long time, while the silt soil is known to drain it off much quicker.

A professional landscaping and gardening expert can give you more detailed information about the fertilizing frequency if you wish to make it highly efficient. It is because he can use high-end technology tools to evaluate the fertility and water-retaining capacity of the soil accurately.

Soil Fertility Management – Natural Vs Processed Fertilizers


Natural fertilizers are organic and they have 15 essential elements required for soil fertility. The other three elements are available from sunlight, air, and water. Some of the 15 elements required for soil fertility are iron, calcium, potassium, boron, phosphorous, and nitrogen. In addition, you can also use livestock-waste, garden-waste, veggies-waste, and other organic materials.

The best way to make organic fertilizers at home is to start with nutrients. Make a mixing of powders from iron, calcium, potassium, boron, phosphorous, and nitrogen. Mix the equal volumes of fish-emulsion, soybean, seaweed, and natural compost.

You have to mix them well and store them in a cool and large tank. You can let the mix decompose for about two weeks before using it. Make a fine crush with an equal volume of water and spray over the grass and plants. You may also use the automatic sprinklers for doing it.

If you are using a processed fertilizer, it is important to ensure there are no chemicals in it. It is to protect the soil and grass from the harmful effects of oxidizing elements. All you need to do is to mix the fertilizer powder with three to four times the volume of water and sprinkle.

Fertilizer Sprinkling Frequency – How to Calculate

Every 100-square feet of the garden will approximately require about 2 pounds of fertilizer. Of course, it includes the plants, grass, bushes, and trees, and other types of vegetation that grows here. If the soil is poor in minerals and nutrients, you may be required to make it 3 pounds.

Winter is the time when the grass and plants in your garden will be in the peak of growth. You can fertilize them at least once in four weeks to ensure healthy growth. The frequency of watering can is once in two days or three, depending on the wetness conditions of the soil.

The fertilizing frequency may slightly increase during the fall since the soil tends to lose it due to excess water drainage. So, the fertilizing frequency can be once in two weeks. The volume will depend on the recommendations of your botanist.

Summer is the time when you have to increase the fertilizing frequency along with the watering. You may assume it to be once in a week to keep the grass and plants in a healthy condition. When the soil is clay type loamy the water retention rate is high. Then you have to increase the volume of fertilizing and reduce water accordingly.

During the spring, you have to keep the fertilizing frequency moderate, because the soil will have extra-retention time. Excess of fertilizing can kill the grass and plants, though it is organic. The volume and frequency of watering should also be within the same level of fertilizing frequency.

During rains, you don’t water the grass and plants much. But you have to increase the fertilizing frequency to twice a week, since the water may carry away much of the fertilizer concentration in the soil. So, you have to increase its concentration while mixing with water or any other liquid you may use.

A professional landscaping expert or a botanist can give you the most accurate calculations after doing the soil testing. You have to follow the guidelines accurately to get the best results.

Fertilizer Applying Methods – Manual Vs Automated Systems

Using the liquid fertilizer is stated to be the most effective way to make your garden highly fertile. It is because you can mix it with water and sprinkle with an automated system. Using this process, it is easy to regulate the fertilizing frequency. Let me tell you how.

Plants and grass have a unique way of ingesting the water and fertilizers you feed them. How about feeding them with low quantities in higher frequency than feeding large chunks in less frequency? It is one way of avoiding waste and increasing productivity.

So, you can use drip irrigation that supplies more water and fertilizers to the grass, plants, and the trees in your garden. It will also ensure that they consume and utilize every milliliter of liquid fertilizer and water. As you can see, their growth rate will also increase phenomenally.


I would recommend that you consult your gardening and landscaping contractor to get the most favorable fertilizing frequency for your soil. Of course, you can also do it DIY after getting the soil test report. You need to do a study of climate, soil-moisture, retaining capacity, and other related factors, if you are good at them.


Picking a Good furnace repairman

How to Choose a Furnace Repair Contractor




Even before something happens with your furnace, it is best that you prepare for the worst things to happen to it. There are times that an emergency repair arises. Without a contacting the right furnace repair calgary contractor, you will have to wait for the right contractor and leave the furnace as it is. This is something that you don’t want to happen.

Furnace Pros Calgary

However, there are so many companies that are capable of doing this. And besides, even the best furnace repair contractor out there does not always mean that it is the right one for you. The best furnace repair contractor to hire is someone that you can work comfortably with. And you will get this by following the tips below.


Ask your friends and neighbors

Word of mouth always stays true when it comes to business and recommendations. If you are looking for the right furnace repair contractor, your neighbors should have at least one recommendation or two. Your friends can share some of them as well. The best thing about asking them is because you can ask them their experience with their contractor. There is a high chance that you will have a similar experience with them if you hire their recommended contractor.


Online testimonies and reviews

Since most furnace or HVAC companies these days have their company information online, you can find lots of contractors near your area by searching online. At the same time, you will also see various reviews and testimonies done by the clients that have worked with these contractors. Each of them provides a star rating, showing the satisfactory level of every customer. You will be able to weigh your options and whether the contractor you have chosen got good ratings from its past customers or not. You should also go to other review sites to see whether the satisfactory rating are negative or positive. These sites are Yellow Pages, Angie’s List, Yelp and the SuperPages. Make sure that you read each of the reviews and testimonies to see why they gave that kind of rating to their service.


Compare value and price

Most people usually compare the price rather than the value. Then they start wondering why other companies have it better even though the services offered were only a few dollars apart.


It can be very tempting to choose a furnace repair contractor based solely on price, but you should be vigilant when you go to the lowest bidder. The cheapest option can be very dangerous and risky to you since the processes involved in furnace repair can be very complex. The reliability and success of the system entirely depend on the abilities that the technicians involved in it possess. It doesn’t always have anything to do with the factory specifications of the system. The technicians must possess skills with carpentry, plumbing, refrigeration and electrical work. This is a very demanding field, so it is your responsibility to ensure that the furnace repair contractor is both skilled and experienced in the said areas. You should also make sure that they have NATE certifications, not to mention trained in both factory and field work.

Find a good closet designer


There are so many designers and companies that are best in designing your closets Calgary as per your choice of design and materials, depending upon the need you have. These companies help you to make your living simpler and help you handle your belongings well and organised. There are many closet companies that offer you wonderful benefits of having a closet designed by them.
Most of the builders generally put a simple rod and shelf and call it a closet but its boring and dull. There are many closet companies in the market that offer you with much more beautiful improvements that help you live with a class. If you want to have a design that can store your belongings well, you can choose them to design a closet for you as well. But the main problem is how to find a good closet designer that can serve your needs well? It’s not a problem. We provide you some amazing tips that can help you with great closet designs:
• Try to know why having a closet designer is necessary. When a designer visits you to do an estimate, they take a rough count of your belongings like clothes, handbags, shoes, accessories etc and measure the linear feet of shelves and the hanging space that you need. Then they design a custom closet with that estimate. The first thing that you need to do is divide the things properly as how many outfits or accessories you use with the bunch of things that are nothing less than a waste. Once you see what is left, you can measure the area that you need and estimation is done according to that.

Closets Calgary

• Closet companies usually design your closet for free as well as the estimation. They can come again to show you the designs and then you can decide the one you like the most and then you can move forward. In case you don’t like it, you can reject the design and the deal. You can also give them a second chance for better designs.
• There are things that you must ask them before you finalise the deal. You should ask them questions regarding how long they have been doing the business and if they are a franchise or not. You must ask them questions related to the warranty period they generally offer, the colors of the closets available and the materials they deal in.
• Length breadth and height of the closet is must that you must ask. You should also ask about the standard depth of shelves that you use. It’s good if they can work with metal parts because they are long lasting and durable.
• The most important thing that you need to ask them about is the pricing. There are so many companies in the market who are in competition with each other and so they offer cheap prices and discounts to the customer. Make sure you get the best bargain in the market as per the design offered.